Mastering Autodesk Inventor All Courses

2014
24:01 hours

├── Mastering Autodesk Inventor – Administration and Data Exchange
│ ├── 01. Introduction
│ │ ├── 0101 Introduction – About The Course.mp4
│ │ ├── 0102 Introduction – About The Author.mp4
│ │ ├── 0103 Introduction – How To Access Your Working Files.mp4
│ │ └── 0103 Introduction – How To Access Your Working Files.mp4.jpg
│ ├── 02. Inventor Settings And Content Center
│ │ ├── 0201 Inventor Settings And Content Center – Application Options.mp4
│ │ ├── 0202 Inventor Settings And Content Center – Document Settings.mp4
│ │ ├── 0203 Inventor Settings And Content Center – Project File Overview.mp4
│ │ ├── 0204 Inventor Settings And Content Center – Creating Project Files.mp4
│ │ ├── 0205 Inventor Settings And Content Center – Content Center Administration – Part 1.mp4
│ │ ├── 0206 Inventor Settings And Content Center – Content Center Administration – Part 2.mp4
│ │ ├── 0207 Inventor Settings And Content Center – Publishing Parts To Content Center – Part 1.mp4
│ │ └── 0208 Inventor Settings And Content Center – Publishing Parts To Content Center – Part 2.mp4
│ ├── 03. Templates
│ │ ├── 0301 Templates – Creating Templates.mp4
│ │ └── 0302 Templates – Creating Start Parts.mp4
│ ├── 04. Drawing Standards And Resources
│ │ ├── 0401 Drawing Standards And Resources – Drawing Template Overview.mp4
│ │ ├── 0402 Drawing Standards And Resources – Starting A Drawing From Scratch.mp4
│ │ ├── 0403 Drawing Standards And Resources – Drawing Styles And Standards – Part 1.mp4
│ │ ├── 0404 Drawing Standards And Resources – Drawing Styles And Standards – Part 2.mp4
│ │ ├── 0405 Drawing Standards And Resources – Updating Styles And Standards.mp4
│ │ ├── 0406 Drawing Standards And Resources – Creating A Custom Border – Part 1.mp4
│ │ ├── 0407 Drawing Standards And Resources – Creating A Custom Border – Part 2.mp4
│ │ ├── 0408 Drawing Standards And Resources – Creating A Title Block – Part 1.mp4
│ │ ├── 0409 Drawing Standards And Resources – Creating A Title Block – Part 2.mp4
│ │ ├── 0410 Drawing Standards And Resources – Creating A Title Block – Part 3.mp4
│ │ ├── 0411 Drawing Standards And Resources – Creating Sheet Formats.mp4
│ │ ├── 0412 Drawing Standards And Resources – Creating Sketched Symbols.mp4
│ │ └── 0413 Drawing Standards And Resources – Creating A Custom Drawing Template.mp4
│ ├── 05. Model Collaboration
│ │ ├── 0501 Model Collaboration – File Translation.mp4
│ │ ├── 0502 Model Collaboration – Edit Solid Tools.mp4
│ │ ├── 0503. Model Collaboration – Repairing Imports – Part 1.mp4
│ │ ├── 0504 Model Collaboration – Repairing Imports – Part 2.mp4
│ │ ├── 0505 Model Collaboration – Direct Edit.mp4
│ │ └── 0506 Model Collaboration – Exporting To Other Formats.mp4
│ ├── 06. Protecting Intellectual Property
│ │ ├── 0601 Protecting Intellectual Property – Feature Suppression.mp4
│ │ ├── 0602 Protecting Intellectual Property – Shrink Wrapping.mp4
│ │ ├── 0603 Protecting Intellectual Property – Derive Simplification.mp4
│ │ └── 0604 Protecting Intellectual Property – Model Simplification.mp4
│ ├── 07. Conclusion
│ │ └── 0701 Conclusion – Wrap Up.mp4
│ └── 08. Working Files
│ └── Mastering_Autodesk_Inventor_Administration_and_Data_Exchange_Working_Files.zip
├── Mastering Autodesk Inventor – Advanced Assemblies
│ ├── 01. Introduction
│ │ ├── 0101 Introduction – About The Course.mp4
│ │ ├── 0102 Introduction – About The Author.mp4
│ │ ├── 0103 Introduction – How To Access Your Working Files.mp4
│ │ └── 0103 Introduction – How To Access Your Working Files.mp4.jpg
│ ├── 02. Working With Large Assemblies
│ │ ├── 0201 Working With Large Assemblies – Large Assembly Overview.mp4
│ │ ├── 0202 Working With Large Assemblies – Assembly Express Mode.mp4
│ │ └── 0203 Working With Large Assemblies – Large Assembly Drawings.mp4
│ ├── 03. Advanced Constraints
│ │ ├── 0301 Advanced Constraints – Limiting Constraints.mp4
│ │ ├── 0302 Advanced Constraints – Flexible Components.mp4
│ │ ├── 0303 Advanced Constraints – Motion And Translational Constraints.mp4
│ │ ├── 0304 Advanced Constraints – Transitional Constraints.mp4
│ │ └── 0305 Advanced Constraints – UCS Constraint Sets.mp4
│ ├── 04. Positional Representations
│ │ ├── 0401 Positional Representations – Positional Representation Overview.mp4
│ │ ├── 0402 Positional Representations – Creating Positional Representations.mp4
│ │ ├── 0403 Positional Representations – Editing Positional Representations.mp4
│ │ └── 0404 Positional Representations – Positional Representation In Drawings.mp4
│ ├── 05. Level Of Detail Representations
│ │ ├── 0501 Level Of Detail Representations – Level Of Detail Overview.mp4
│ │ ├── 0502 Level Of Detail Representations – System Level Of Detail.mp4
│ │ ├── 0503 Level Of Detail Representations – Creating User Level Of Detail.mp4
│ │ ├── 0504 Level Of Detail Representations – Nesting Level Of Detail.mp4
│ │ ├── 0505 Level Of Detail Representations – Using Level Of Detail.mp4
│ │ ├── 0506 Level Of Detail Representations – Substitute Level Of Detail.mp4
│ │ └── 0507 Level Of Detail Representations – Creating And Updating Substitutes.mp4
│ ├── 06. Frame Generator
│ │ ├── 0601 Frame Generator – Introduction To Frame Generator.mp4
│ │ ├── 0602 Frame Generator – Creating A Frame Skeleton.mp4
│ │ ├── 0603 Frame Generator – Inserting Skeleton And Members.mp4
│ │ ├── 0604 Frame Generator – Frame Generator End Treatments – Part 1.mp4
│ │ ├── 0605 Frame Generator – Frame Generator End Treatments – Part 2.mp4
│ │ ├── 0606 Frame Generator – Frame Generator Reuse And Change Reuse.mp4
│ │ ├── 0607 Frame Generator – Frame Analysis Methods.mp4
│ │ ├── 0608 Frame Generator – Frame Generator Documentation.mp4
│ │ └── 0609 Frame Generator – Structural Shape Authoring.mp4
│ ├── 07. Weldments
│ │ ├── 0701 Weldments – Weldment Environment.mp4
│ │ ├── 0702 Weldments – Assembly Weld Preparations.mp4
│ │ ├── 0703 Weldments – Assembly Welds – Part 1.mp4
│ │ ├── 0704 Weldments – Assembly Welds – Part 2.mp4
│ │ ├── 0705 Weldments – Assembly Weld Machining.mp4
│ │ └── 0706 Weldments – Weldment Documentation.mp4
│ ├── 08. Conclusion
│ │ └── 0801 Conclusion – Wrap Up.mp4
│ └── 09. Working Files
│ └── Mastering_Autodesk_Inventor_Advanced_Assemblies_Working_Files.zip
├── Mastering Autodesk Inventor – Advanced Parts
│ ├── 01. Introduction
│ │ ├── 0101 Introduction – About The Course.mp4
│ │ ├── 0102 Introduction – About The Author.mp4
│ │ ├── 0103 Introduction – How To Access Your Working Files.mp4
│ │ └── 0103 Introduction – How To Access Your Working Files.mp4.jpg
│ ├── 02. Advanced Sketching
│ │ ├── 0201 Advanced Sketching – 3D Sketching.mp4
│ │ ├── 0202 Advanced Sketching – 3D Sketching Tools – Part 1.mp4
│ │ └── 0203 Advanced Sketching – 3D Sketching Tools – Part 2.mp4
│ ├── 03. Advanced Modelling
│ │ ├── 0301 Advanced Modelling – Advanced Modelling Topics.mp4
│ │ ├── 0302 Advanced Modelling – Sweep With Guide Rail.mp4
│ │ ├── 0303 Advanced Modelling – Sweep With Guide Surface.mp4
│ │ ├── 0304 Advanced Modelling – Sweep With A Twist.mp4
│ │ ├── 0305 Advanced Modelling – Centerline Loft.mp4
│ │ ├── 0306 Advanced Modelling – Area Loft.mp4
│ │ ├── 0307 Advanced Modelling – UCS Work Features.mp4
│ │ ├── 0308 Advanced Modelling – Rib.mp4
│ │ ├── 0309 Advanced Modelling – Emboss And Engrave.mp4
│ │ ├── 0310 Advanced Modelling – Decals.mp4
│ │ └── 0311 Advanced Modelling – Derived Parts.mp4
│ ├── 04. Advanced Modification Tools
│ │ ├── 0401 Advanced Modification Tools – Draft.mp4
│ │ ├── 0402 Advanced Modification Tools – Split.mp4
│ │ ├── 0403 Advanced Modification Tools – Curve Driven Patterns.mp4
│ │ ├── 0404 Advanced Modification Tools – Copy Object.mp4
│ │ ├── 0405 Advanced Modification Tools – Bend Part.mp4
│ │ ├── 0406 Advanced Modification Tools – Delete Face.mp4
│ │ ├── 0407 Advanced Modification Tools – Face Fillets.mp4
│ │ └── 0408 Advanced Modification Tools – Full Round Fillets.mp4
│ ├── 05. Multi-Body Modelling
│ │ ├── 0501 Multi-Body Modelling – Multi-Body Modelling.mp4
│ │ ├── 0502 Multi-Body Modelling – Multi-Body Creation – Part 1.mp4
│ │ ├── 0503 Multi-Body Modelling – Multi-Body Creation – Part 2.mp4
│ │ ├── 0504 Multi-Body Modelling – Multi-Body Modification – Part 1.mp4
│ │ ├── 0505 Multi-Body Modelling – Multi-Body Modification – Part 2.mp4
│ │ ├── 0506 Multi-Body Modelling – Multi-Body Modification – Part 3.mp4
│ │ ├── 0507 Multi-Body Modelling – Multi-Body Duplication.mp4
│ │ ├── 0508 Multi-Body Modelling – Complex Multi-Body Modelling.mp4
│ │ └── 0509 Multi-Body Modelling – Multi-Body Properties.mp4
│ ├── 06. Multi-Body Assemblies And Drawing
│ │ ├── 0601 Multi-Body Assemblies and Drawings – Make Components – Part 1.mp4
│ │ ├── 0602 Multi-Body Assemblies and Drawings – Make Components – Part 2.mp4
│ │ ├── 0603 Multi-Body Assemblies and Drawings – Make Part.mp4
│ │ └── 0604 Multi-Body Assemblies and Drawings – Multi-Body Documentation.mp4
│ ├── 07. Conclusion
│ │ └── 0701 Conclusion – Wrap-Up.mp4
│ └── 08. Working Files
│ └── Mastering_Autodesk_Inventor_Advanced_Parts_Working_Files.zip
├── Mastering Autodesk Inventor – Configured Design
│ ├── 01. Introduction To Configured Design
│ │ ├── 0101 Introduction To Configured Design – About Configured Design.mp4
│ │ ├── 0102 Introduction To Configured Design – About The Author.mp4
│ │ ├── 0103 Introduction To Configured Design – Parameter Review.mp4
│ │ ├── 0104 Introduction To Configured Design – Model Linking.mp4
│ │ ├── 0105 Introduction To Configured Design – Excel Linking And Embedding.mp4
│ │ └── 0106 Introduction To Configured Design – How To Access Your Working Files.mp4
│ ├── 02. iFeatures
│ │ ├── 0201 iFeatures – What Are iFeatures.mp4
│ │ ├── 0202 iFeatures – Creating iFeatures.mp4
│ │ ├── 0203 iFeatures – Placing iFeatures.mp4
│ │ ├── 0204 iFeatures – Editing iFeatures.mp4
│ │ ├── 0205 iFeatures – Table Driven iFeatures.mp4
│ │ ├── 0206 iFeatures – iFeature Application Options.mp4
│ │ └── 0207 iFeatures – Copying Features Vs. iFeatures.mp4
│ ├── 03. iParts
│ │ ├── 0301 iParts – What Are iParts.mp4
│ │ ├── 0302 iParts – iPart Creation – Part 1.mp4
│ │ ├── 0303 iParts – iPart Creation – Part 2.mp4
│ │ ├── 0304 iParts – iPart Creation – Part 3.mp4
│ │ ├── 0305 iParts – iPart Place And Replace.mp4
│ │ ├── 0306 iParts – Editing An iPart.mp4
│ │ ├── 0307 iParts – iPart Documentation.mp4
│ │ ├── 0308 iParts – iPart Updating.mp4
│ │ └── 0309 iParts – Content Center Publishing.mp4
│ ├── 04. iAssemblies
│ │ ├── 0401 iAssemblies – What Are iAssemblies.mp4
│ │ ├── 0402 iAssemblies – Create Basic iAssemblies – Part 1.mp4
│ │ ├── 0403 iAssemblies – Create Basic iAssemblies – Part 2.mp4
│ │ ├── 0404 iAssemblies – Create Multi-Level iAssemblies.mp4
│ │ ├── 0405 iAssemblies – iAssembly Place And Replace.mp4
│ │ ├── 0406 iAssemblies – Documenting iAssemblies.mp4
│ │ └── 0407 iAssemblies – iAssembly Updating.mp4
│ ├── 05. iLogic
│ │ ├── 0501 iLogic – iLogic Overview.mp4
│ │ ├── 0502 iLogic – iLogic Interface.mp4
│ │ ├── 0503 iLogic – Conditional Statements – Part 1.mp4
│ │ ├── 0504 iLogic – Conditional Statements – Part 2.mp4
│ │ ├── 0505 iLogic – Rule Options And Wizards.mp4
│ │ ├── 0506 iLogic – Triggering And Forms.mp4
│ │ └── 0507 iLogic – Smart Templates.mp4
│ ├── 06. Wrap Up
│ │ └── 0601 Wrap-Up – Configured Design Recap.mp4
│ └── 07. Working Files
│ └── Mastering_Autodesk_Inventor_Configured_Design_Working_Files.zip
├── Mastering Autodesk Inventor – Sheet Metal Design
│ ├── 01. Sheet Metal Design Overview
│ │ ├── 0101 Sheet Metal Design Overview – Overview Of Inventor Sheet Metal.mp4
│ │ ├── 0102 Sheet Metal Design Overview – Sheet Metal Templates.mp4
│ │ ├── 0103 Sheet Metal Design Overview – Sheet Metal Styles.mp4
│ │ ├── 0104 Sheet Metal Design Overview – About The Author.mp4
│ │ └── 0105 Sheet Metal Design Overview – How To Access Your Working Files.mp4
│ ├── 02. Sheet Metal Base Features
│ │ ├── 0202 Sheet Metal Base Features – Contour Flange.mp4
│ │ ├── 0203 Sheet Metal Base Features – Contour Roll.mp4
│ │ ├── 0204 Sheet Metal Base Features – Lofted Flange.mp4
│ │ └── 02. Sheet Metal Base Features – Face.mp4
│ ├── 03. Sheet Metal Secondary Features
│ │ ├── 0301 Sheet Metal Secondary Features – Secondary Faces.mp4
│ │ ├── 0302 Sheet Metal Secondary Features – Flanges.mp4
│ │ ├── 0303 Sheet Metal Secondary Features – Secondary Contour Flanges.mp4
│ │ ├── 0304 Sheet Metal Secondary Features – Secondary Contour Rolls.mp4
│ │ ├── 0305 Sheet Metal Secondary Features – Folds.mp4
│ │ ├── 0306 Sheet Metal Secondary Features – Bends.mp4
│ │ ├── 0307 Sheet Metal Secondary Features – Hems.mp4
│ │ ├── 0308 Sheet Metal Secondary Features – Bend Relief Types.mp4
│ │ └── 0309 Sheet Metal Secondary Features – Corner Relief Types.mp4
│ ├── 04. Sheet Metal Modification Tools
│ │ ├── 0401 Sheet Metal Modification Tools – Cuts.mp4
│ │ ├── 0402 Sheet Metal Modification Tools – Corner Seams, Rips And Bends.mp4
│ │ ├── 0403 Sheet Metal Modification Tools – Rips.mp4
│ │ ├── 0404 Sheet Metal Modification Tools – Unfold And Refold.mp4
│ │ ├── 0405 Sheet Metal Modification Tools – Corner Rounds And Chamfers.mp4
│ │ ├── 0406 Sheet Metal Modification Tools – Punch Tools.mp4
│ │ ├── 0407 Sheet Metal Modification Tools – Creating Punches.mp4
│ │ └── 0408 Sheet Metal Modification Tools – Working With Mirrored Sheet Metal.mp4
│ ├── 05. Creating Flat Patterns
│ │ ├── 0501 Creating Flat Patterns – Flat Pattern Environment.mp4
│ │ ├── 0502 Creating Flat Patterns – Orienting Flat Patterns.mp4
│ │ ├── 0503 Creating Flat Patterns – Bend Order.mp4
│ │ ├── 0504 Creating Flat Patterns – Cosmetic Centerlines.mp4
│ │ └── 0505 Creating Flat Patterns – Exporting Flat Patterns.mp4
│ ├── 06. Sheet Metal Documentation
│ │ ├── 0601 Sheet Metal Documentation – Placing Views.mp4
│ │ ├── 0602 Sheet Metal Documentation – Bend Annotation.mp4
│ │ ├── 0603 Sheet Metal Documentation – Punch Notes And Tables.mp4
│ │ └── 0604 Sheet Metal Documentation – Sheet Metal Conclusion.mp4
│ └── 07. Working Files
│ └── Mastering_Autodesk_Inventor_Sheet_Metal_Design_Working_Files.zip
├── Mastering Autodesk Inventor – Surfacing
│ ├── 01. Introduction
│ │ ├── 0101 Introduction – Introduction To Autodesk Inventor 2014 Surfacing.mp4
│ │ ├── 0102 Introduction – About The Author.mp4
│ │ ├── 0103 Introduction – What You Will Learn.mp4
│ │ └── 0104 Introduction – How To Access Your Working Files.mp4
│ ├── 02. Hard Surface Modelling Primer
│ │ ├── 0201 Hard Surface Modelling Primer – Surfacing With Autodesk Inventor.mp4
│ │ ├── 0202 Hard Surface Modelling Primer – Surface And Curve Continuity Explained.mp4
│ │ ├── 0203 Hard Surface Modelling Primer – Surfacing Geometry And Topology.mp4
│ │ └── 0204 Hard Surface Modelling Primer – Surfacing Gotchas And Troubleshooting.mp4
│ ├── 03. 2D And 3D Sketching – Framework For Success
│ │ ├── 0301 2D And 3D Sketching – Framework For Success – 2D CV And Interpolation Splines.mp4
│ │ ├── 0302 2D And 3D Sketching – Framework For Success – 3D CV And Interpolation Splines.mp4
│ │ └── 0303 2D And 3D Sketching – Framework For Success – Projected Curves.mp4
│ ├── 04. Surface Tools Explained
│ │ ├── 0401 Surfacing Tools Explained – Algebraic Vs. NURBS Surfaces.mp4
│ │ ├── 0402 Surfacing Tools Explained – Lofts, Sweeps And Patches.mp4
│ │ ├── 0403 Surfacing Tools Explained – Trimming And Splitting Surfaces.mp4
│ │ ├── 0404 Surfacing Tools Explained – Copying And Moving Surfaces.mp4
│ │ ├── 0405 Surfacing Tools Explained – Filleting Surfaces.mp4
│ │ ├── 0406 Surfacing Tools Explained – Converting Surfaces To Solids.mp4
│ │ ├── 0407 Surfacing Tools Explained – Inserting Reference Sketches.mp4
│ │ └── 0408 Surfacing Tools Explained – Surface Analysis.mp4
│ ├── 05. Examples
│ │ ├── 0501 Examples – Creating A Pillowed Surface.mp4
│ │ ├── 0502 Examples – Creating End Caps.mp4
│ │ ├── 0503 Examples – Creating Styling Creases.mp4
│ │ ├── 0504 Examples – Dips, Dimples, Divots And Depressions.mp4
│ │ └── 0505 Examples – Saving And Re-Using Surface Features.mp4
│ ├── 06. Final Projects
│ │ ├── 0601 Final Projects – Spoon.mp4
│ │ ├── 0602 Final Projects – Kitchen Knife.mp4
│ │ └── 0603 Final Projects – Computer Mouse.mp4
│ ├── 07. Conclusion
│ │ └── 0701 Conclusion – Wrap-Up.mp4
│ └── 08. Working Files
│ └── Mastering_Autodesk_Inventor_Surfacing_Working_Files.zip
├── Mastering Autodesk Inventor – Tooling and Plastic Design
│ ├── 01. Introduction
│ │ ├── 0101 Introduction – About The Course.mp4
│ │ ├── 0102 Introduction – About The Author.mp4
│ │ └── 0103 Introduction – How To Access Your Working Files.mp4
│ ├── 02. Plastic Part Design Tools
│ │ ├── 0201 Plastic Part Design Tools – Plastic Part Features.mp4
│ │ ├── 0202 Plastic Part Design Tools – Grill.mp4
│ │ ├── 0203 Plastic Part Design Tools – Rest.mp4
│ │ ├── 0204 Plastic Part Design Tools – Lip.mp4
│ │ ├── 0205 Plastic Part Design Tools – Boss.mp4
│ │ ├── 0206 Plastic Part Design Tools – Snap Fit.mp4
│ │ └── 0207 Plastic Part Design Tools – Rule Fillet.mp4
│ ├── 03. Inventor Mold OverView
│ │ ├── 0301 Inventor Mold Overview – Overview Of Inventor Tooling.mp4
│ │ ├── 0302 Inventor Mold Overview – Inventor Tooling Interface Changes.mp4
│ │ ├── 0303 Inventor Mold Overview – Additional Mold Libraries.mp4
│ │ ├── 0304 Inventor Mold Overview – Moldflow Integration.mp4
│ │ └── 0305 Inventor Mold Overview – Tooling File Naming.mp4
│ ├── 04. Mold Core And Cavity
│ │ ├── 0401 Mold Core And Cavity – Insert Plastic Part Or Core Or Cavity.mp4
│ │ ├── 0402 Mold Core And Cavity – Adjust Orientation And Pattern.mp4
│ │ ├── 0403 Mold Core And Cavity – Material Selection.mp4
│ │ ├── 0404 Mold Core And Cavity – Gate Location And Shrinkage.mp4
│ │ ├── 0405 Mold Core And Cavity – Core And Cavity Workpiece.mp4
│ │ ├── 0406 Mold Core And Cavity – Fill Analysis And Animation.mp4
│ │ ├── 0407 Mold Core And Cavity – Patching And Runoff Surfaces.mp4
│ │ ├── 0408 Mold Core And Cavity – Generate Core And Cavity.mp4
│ │ ├── 0409 Mold Core And Cavity – Core Pins And Inserts.mp4
│ │ └── 0410 Mold Core And Cavity – Combine, Runners, Gates, And Cold Wells.mp4
│ ├── 05. Mold Layout And Assembly Design I
│ │ ├── 0501 Mold Layout And Assembly Design I – Mold Base Selection.mp4
│ │ ├── 0502 Mold Layout And Assembly Design I – Ejectors.mp4
│ │ ├── 0503 Mold Layout And Assembly Design I – Sliders.mp4
│ │ ├── 0504 Mold Layout And Assembly Design I – Lifters.mp4
│ │ └── 0505 Mold Layout And Assembly Design I – Sprue Bushing And Locating Ring.mp4
│ ├── 06. Mold Layout And Assembly Design II
│ │ ├── 0601 Mold Layout And Assembly Design II – Cooling Channels.mp4
│ │ ├── 0602 Mold Layout And Assembly Design II – Cooling Components.mp4
│ │ ├── 0603 Mold Layout And Assembly Design II – Lock Sets.mp4
│ │ ├── 0604 Mold Layout And Assembly Design II – Combine Cores And Cavities.mp4
│ │ └── 0605 Mold Layout And Assembly Design II – Mold Boolean.mp4
│ ├── 07. Mold Documentation
│ │ ├── 0701 Mold Documentation – Mold Analysis.mp4
│ │ ├── 0702 Mold Documentation – Mold Kinematics.mp4
│ │ └── 0703 Mold Documentation – Drawing Automation.mp4
│ ├── 08. Conclusion
│ │ └── 0801 Conclusion – Course Wrap Up.mp4
│ └── 09. Working Files
│ └── Mastering_Autodesk_Inventor_Tooling_and_Plastic_Design_Working_Files.zip
└── Mastering Autodesk Inventor – T-Splines
├── 01. Introduction
│ ├── 0101 Introduction – Introduction To Autodesk Inventor 2015 T-Splines.mp4
│ ├── 0102 Introduction – About The Author.mp4
│ ├── 0103 Introduction – What You Will Learn.mp4
│ ├── 0104 Introduction – How To Access Your Working Files.mp4
│ ├── Softarchive – Download More.url
│ ├── Software For MacOSX.txt
│ └── Windows 8_10 – Office 2013_2016 – Visual Studio.txt
├── 02. Subdivision Modelling Primer
│ ├── 0201 Subdivision Modelling Primer – What Are T-Splines And Why We Use Them.mp4
│ ├── 0202 Subdivision Modelling Primer – CVs, Control Polygons, The Cage And Subdivision Explained.mp4
│ ├── 0203 Subdivision Modelling Primer – Surfaces Vs T-Splines.mp4
│ └── 0204 Subdivision Modelling Primer – T-Splines Troubleshooting.mp4
├── 03. T-Splines Tools
│ ├── 0301 T-Splines Tools – Creating T-Splines Primitives.mp4
│ ├── 0302 T-Splines Tools – The Marvellous Magical Manipulator.mp4
│ ├── 0303 T-Splines Tools – Adding And Removing Symmetry From T-Spline Surfaces.mp4
│ ├── 0304 T-Splines Tools – Inserting, Sharpening And Creasing Edges.mp4
│ ├── 0305 T-Splines Tools – Adding Faces By Extruding And Subdividing.mp4
│ ├── 0306 T-Splines Tools – Simplifying T-Spline Surfaces By Deleting Geometry.mp4
│ ├── 0307 T-Splines Tools – Adding Bridges And Tunnels.mp4
│ ├── 0308 T-Splines Tools – Converting Freeform T-Spline Surfaces Into Solids.mp4
│ └── 0309 T-Splines Tools – Matching T-Spline Edges For Greater Accuracy.mp4
├── 04. Project Spoon
│ ├── 0401 Project Spoon – Inserting A Reference Image.mp4
│ ├── 0402 Project Spoon – Creating The Bowl.mp4
│ ├── 0403 Project Spoon – Extruding The Handle.mp4
│ ├── Softarchive – Download More.url
│ ├── Software For MacOSX.txt
│ └── Windows 8_10 – Office 2013_2016 – Visual Studio.txt
├── 05. Project Mug
│ ├── 0501 Project Mug – Forming The Body.mp4
│ ├── 0502 Project Mug – Bridging The Handle.mp4
│ └── 0503 Project Mug – Hollowing Out The Centre.mp4
├── 06. Project Saw
│ ├── 0601 Project Saw – Roughing Out The Saw Handle.mp4
│ ├── 0602 Project Saw – Adding Definition To The Shape.mp4
│ ├── 0603 Project Saw – Bridging The Finger Hole.mp4
│ └── 0604 Project Saw – Converting To A Solid And Adding Features.mp4
├── 07. Conclusion
│ ├── 0701 Conclusion – Wrap Up.mp4
│ ├── Softarchive – Download More.url
│ ├── Software For MacOSX.txt
│ └── Windows 8_10 – Office 2013_2016 – Visual Studio.txt
└── 08. Working Files
└── Mastering_Autodesk_Inventor_T_Splines_Working_Files.zip